By default, it is set for US country code. This guide uses AirportBrcmFixup.kext to enable Broadcom WiFi. It is up to you to investigate properly to discover how your bluetooth hardware is configured.įurther information regarding OS X compatible WiFi is in the FAQ: For those laptops you do not need a WiFi/bluetooth combination card since the bluetooth component on it will not be connected and you can use the onboard bluetooth controller instead (usually Broadcom). Note: Some laptops covered by this guide have a built-in bluetooth controller and do not use the one present on the WiFi card. Note: Atheros WiFi not supported on Mojave (Apple removed it). WIFI+BT: AR5B195 (not recommended), Broadcom 43225HMB/4352HMB (better OS X feature support) WIFI ONLY: Atheros AR9280/9285, Broadcom 4322/43224 (better OS X feature support) For laptops with NGFF/M.2 WiFi slot: BCM94352Z or BCM94350ZAE (? not tested/not recommended) or BCM943602BAED (works but may require additional antenna leads to be installed) You can also use a rebranded AR5BHB92 (AR9280). HP Probook 4x30s: the laptop has whitelist BIOS, so only usable card is HP-branded Atheros AR5B195 (HP part# 593127-001). Here is the list of recommended compatible wifi cards: Refer to SSDT-1020-G1-Broadwell.dsl for an example. Other trackpads will be mouse emulation only and require special code in the model specific SSDT. Note: This guide supports only those laptops with Synaptics PS2 trackpads. Although many of the procedures and techniques here may be applicable, these laptops require a different graphics configuration (ist changes, other kext choices, slightly different ACPI setup). Note: HD3000 not supported on Mojave (Apple removed it).Īt the moment, laptops without Intel graphics are not supported. You may have glitches and other instability with only 4GB RAM. BIOS updated to latest as available from hp.comįor HD3000 graphics equipped systems, it is recommended you have 8GB RAM installed. macOS or OS X downloaded from the Mac App Store Like Kabylake, Kabylake-R requires 10.12.6 or later. 100-series laptop (Kabylake-R): HP ProBook 4x0 G5 is experimental, but also reported as working. HP EliteBook 8x0 G4 support is new, not tested. Note that the support in this guide for KabyLake assumes 10.12.6 or later. 100-series laptop (Kabylake): HP ProBook 4x0 G4 is experimental, but reported as working. 100-series laptop (Skylake): HP ProBook 4x0 G3 is experimental, but reported as working. 9-series laptop (Broadwell): HP Probook 4x0/6x0/8x0/ZBook G2 8-series laptop (Haswell): HP Probook 3x0 G1, Probook 4x0 G1/G2, Elitebook 8x0 G1, ZBook G1, Folio 1040 G1 7-series laptop (Ivy Bridge or Sandy Bridge): HP Probook 4x40s, 4x0 G0, 6x70b, Elitebook 8x70p, 2x70p, 9470m 6-series laptop (Sandy Bridge): HP Probook 4x30s, 6圆0b, Elitebook 2圆0p, 8圆0p, 8圆0w Since the ProBook Installer is not being maintained anymore (and neither is the guide), this is meant as a replacement for the guide by nguyenmac: The files and procedures here have been tested on other models, although they may still need tweaks. I have both a ProBook 4530s, and ProBook 4540s and have been using the hotpatch technique that this guide enables for quite a while. And Skylake support was only introduced in 10.11 (.?), and only stable enough for use in 10.11.4 or later. Broadwell support in 10.10 is not stable (previous versions no Broadwell support). Note: For Broadwell and Skylake hardware, you must install at least 10.11. The purpose of this guide is to provide a step-by-step guide to installing Mojave, High Sierra, Sierra, El Capitan, or Yosemite on the ProBook/EliteBook/Zbook equipped with Intel graphics. Building a CustoMac Hackintosh: Buyer's Guide
0 Comments
Leave a Reply. |